Having been there? Because the legs broke off and you don't want to wait order a new one... or the holes are in the wrong place. And if you need to do this nonsense might as well make it long enough to solider without screaming.
In Reply To: this post
Having been there? Because the legs broke off and you don't want to wait order a new one... or the holes are in the wrong place. And if you need to do this nonsense might as well make it long enough to solider without screaming.
Likes: 0
Boosts: 0
Hashtags:
Mentions:
Comments
Displaying 0 of 1 comments
Nazo
In response to this post@futurebird @john_newall But... Like they're too long as-is anyway and could easily be shorter, plus you could just have the one side straight down then only run long leads to the other. Also the scorching makes me wonder if they used a flame instead of a soldering iron.
And and... well, a bunch of things!
@nazokiyoubinbou @john_newall
I suspect the traces on the board are torn up because maybe it was a cheap board and the desoldering didn't go well.
by myrmepropagandist ;
Likes: 0
Replies: 1
Boosts: 0